AMMTIAC's Publications & Tools
AMMTIAC's Product Catalog offers a comprehensive product line of
publications, databases and software tools relevant to materials, manufacturing and testing. You may view all products related to a category of
interest or keyword phrase.
(select a category from the drop-down on the left or enter a
word/phrase in the space provided on the right)
AMP226 - 1974 Gas Turbine Materials in the Marine Environment Conference
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 07/01/1974
The purpose of the 1974 conference was to continue naval air and surface fleet coordination in the area of hot corrosion research and materials development to mitigate the problem of hot corrosion.
AMP239 - 1978 Tri-Service Conference on Corrosion
Domestic Price: $60.00
Foreign Price: $90.00
Publication Date: 05/01/1979
The purpose of this conference was to make DoD personnel and contractors aware of important corrosion problems in military equipment.
AMP174 - A New End Tab Design for Off-Axis Tension Test of Composite Materials
Domestic Price: $10.00
Foreign Price: $15.00
Publication Date: 03/01/1987
In high temperature environments testing methods must be very simple. Thus, using off-axis composite specimens, a number of mechanical properties can be determined using simple tension tests.
Table of Contents
First Chapter
AMPT-14 - A Practical Guide to Statistical Analysis of Material Property Data
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 08/20/1999
This report has been specially prepared with the materials professional in mind. It bridges the gap between the science of theoretical statistics and the hands-on world of the practicing technician. The first of its kind, this report presents important statistical analysis methods from the stan...learn more
Table of Contents
First Chapter
AMP238 - A Review of the Status, Selection, and Physical Metallurgy of High-Strength, Low-Alloy Steels
Domestic Price: $60.00
Foreign Price: $90.00
Publication Date: 03/01/1979
This report describes the development of HSLA steels, the physical metallurgy of the strengthening processes used, the characteristics of the steels, and their use.
Table of Contents
First Chapter
AMMT-018 - Advanced X-Ray Nondestructive Evaluation (NDE) and Radiology Techniques
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 07/01/2000
This technology assessment report reviews advanced x-ray radiographic techniques and summarizes some of the more prominent applications to NDE. The following techniques are covered: microfocus radiography, computed tomography, microtomography, reverse geometry x-ray, backscatter imaging, digital...learn more
AMP020 - Advances in Joining Technology (AMTC-4)
Domestic Price: $90.00
Foreign Price: $135.00
Publication Date: 09/01/1975
The purpose of this conference was to promote an interchange of experience leading to the successful application of a broad category of materials to advanced structural and electronic design concepts. The focus of the conference was on the relevant developments in the areas of joining metals, cer...learn more
AMPT-10 - Aluminum MMC Consortium Proceedings - Kick Off Meeting
Domestic Price: $25.00
Foreign Price: $38.00
Publication Date: 07/14/1998
Proceedings of the AlMMC Consortium Kick-Off Meeting held February 12-14, 1998 in San Antonio, TX. It includes papers on Commercial Applications, Military Applications, Technology Development, Machining/Material Removal and Performance Qualification.
AMP391 - Aluminum-Lithium Alloy Properties Database
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date:
This database includes thermophysical and mechanical properties related to Aluminum-Lithium Alloys. Access to the database is Windows-based and user friendly. Easy to follow set-up and operating instructions are included in the user manual.
AMMT-004 - Application of Digital Signal Processing & Pattern Recognition to Ultrasonic and Electromagnetic NDT
Domestic Price: $30.00
Foreign Price: $40.00
Publication Date: 01/01/1990
This state-of-the-art review provides an introduction to some of the important digital signal processing and pattern recognition techniques which have found use in the field of nondestructive evaluation. This report is organized into four sections. The first section is an overview, followed by ...learn more
AMP393 - Austempered Ductile Iron Properties Database
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date:
This database includes thermophysical and mechanical properties related to Austempered Ductile Iron. Access to the database is Windows-based and user friendly. Easy to follow set-up and operating instructions are included in the user manual.
AMP172 - Availability of Data on the Thermophysical, Thermoradiative, Electronic, Elec., Mag., & Optical Prop. of Refractory Borides, Carbides, and Silicides
Domestic Price: $60.00
Foreign Price: $90.00
Publication Date: 03/01/1986
This report presents the results of a comprehensive survey and assessment of the availability of data in the worldwide scientific and technical literature on the thermophysical, thermoradiative, electronic, electrical, magnetic, and optical properties of refractory borides, carbides, and silicide...learn more
Table of Contents
First Chapter
AMP030 - Bibliography on Ceramic Matrix Composites and Reinforcing Whiskers, Platelets, and Fibers 1970 - 1990
Domestic Price: $65.00
Foreign Price: $98.00
Publication Date: 08/01/1993
This report is organized into three broad categories. These sections range from processing methods, to the bulk of the report to bibliographies of the articles contained throughout the report.
AMP208 - Bibliography on Fibers and Composite Materials 1969-1972
Domestic Price: $45.00
Foreign Price: $60.00
Publication Date: 07/01/1972
This bibliography is comprised of references pertaining to fibers and fibrous composite materials.
AMP237 - Bibliography on Fibers and Composite Materials 1972 - 1978
Domestic Price: $65.00
Foreign Price: $98.00
Publication Date: 10/01/1978
This bibliography is a continuation and update of prior reports by Battelle's Columbus Laboratories Information Centers on fibers, fiber-reinforced composites, as well as laminates, etc.
AMP273 - Bibliography on Hot Isostatic Pressing (HIP) Technology (includes S1, S2)
Domestic Price: $95.00
Foreign Price: $143.00
Publication Date: 11/01/1992
This report contains an annotated bibliography of 950 documents on the HIP technology dealing with metals, alloys, and intermetallic compounds and covers over 450 materials.
AMP277 - Bibliography on Silicides
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 07/01/1993
This report is an annotated bibliography of over 750 documents on silicides. Documents published from 1952 to 1993 are covered. Within each chapter information is reported for specific silicides.
AMPT-26 - Blast and Penetration Resistant Materials-SOAR
Domestic Price: $115.00
Foreign Price: $150.00
Publication Date: 04/01/2001
[Product sold as CD-ROM]
AMPTIAC compiled the recent and legacy DOD unclassified data on blast and penetration resistant materials (BPRM) and how they are used in structures and armors. Special attention was paid to novel combinations of materials and new, unique uses for traditional materials. ...learn more
Table of Contents
First Chapter
AMMT-021 - Bragg Grating Fiber Optic Based Nondestructive Evaluation
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 09/01/2001
This technology assessment report provides a review of the use of Bragg grating sensors for nondestructive evaluation applications, including structural health monitoring. A background on Bragg grating fiber optic sensors is covered, along with the principal applications. Bragg gratings are dis...learn more
AMP021 - Ceramics for High Performance Applications II, Proceedings of the Fifth Army Materials Technology Conference
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 03/01/1977
This volume, which summarizes the Proceedings of the Fifth Materials Technology Conference, will be most valuable to scientists and engineers concerned with the development of ceramic materials and design technology for high performance applications. The fifty-seven chapters were prepared by one...learn more
AMP018 - Ceramics for High Performance Applications Proceedings of the Second Army Materials Technology Conference
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 11/01/1974
This volume, the Proceedings of the Second Materials Technology Conference, will be invaluable to scientists and engineers concerned with the development of ceramic materials and design technology for high performance applications. The thirty-six chapters were prepared by fifty-two recognized ex...learn more
AMP220 - Ceramics for Prosthetic Applications - Orthopedic, Dental and Cardiovascular
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 07/01/1974
This report discusses areas of interest pertaining to the use of ceramic materials in dental, orthopedic and cardiovascular applications. Work with ceramics oriented toward orthopedic applications such as long-bone repair has to date been concentrated on study of porous calcium aluminate, calcium...learn more
Table of Contents
First Chapter
AMMT-032 - Characterization & NDE of Heat Damage in Graphite/Epoxy Composites (1993)
Domestic Price: $50.00
Foreign Price: $60.00
Publication Date: 01/01/1993
This proceedings documents the presentations made at the Conference as well as the panel discussion held the afternoon of April 28. A keynote address was given, followed by current state-of-the-art regarding characterizing and NDE of heat damage and fleet concerns. A panel discussion was held ...learn more
AMPT-25 - Computational Materials Science (CMS) - CRTA
Domestic Price: $65.00
Foreign Price: $95.00
Publication Date: 04/01/2001
[Product sold as CD-ROM]
AMPTIAC surveyed DOD, government, and academic efforts currently studying materials science through the use of computational methods, and from this research compiled this report. It provides an in-depth examination of CMS and describes many of the programs, techniques, a...learn more
Table of Contents
First Chapter
AMP241 - Corrosion Fatigue of Metals in Marine Environments
Domestic Price: $85.00
Foreign Price: $128.00
Publication Date: 07/01/1981
This book was prepared to document and review the major factors involved in corrosion fatigue of metals in marine environments. This includes both crack initiation and crack growth. For convenient use and reference, discussions on corrosion-fatigue behavior are divided into separate chapters deal...learn more
Table of Contents
First Chapter
AMP198 - Corrosion of Electrical Connectors
Domestic Price: $85.00
Foreign Price: $128.00
Publication Date: 05/01/1986
This report describes the various forms of corrosion, forms of mitigation corrosion, and maintenance procedures that can aid in minimizing corrosion.
Table of Contents
First Chapter
AMP236 - Corrosion of Metals in Marine Environments
Domestic Price: $55.00
Foreign Price: $83.00
Publication Date: 03/01/1978
This report is based on a review of selected literature items, discussion with marine technologists, and information derived from Battelle's own research programs in the marine corrosion field.
Table of Contents
First Chapter
AMP248 - Corrosion of Metals in Marine Environments
Domestic Price: $175.00
Foreign Price: $263.00
Publication Date: 06/01/1986
This report, a companion volume to AMP222, "Corrosion of Metals in the Atmosphere", provides assistance in the selection of materials for equipment or facilities to be used in the ocean environment. Before reviewing the corrosion behavior of the individual materials, the factors which affect thei...learn more
Table of Contents
First Chapter
AMP222 - Corrosion of Metals in the Atmosphere
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 08/01/1974
This state-of-the-art report summarizes the main corrosion characteristics of the commercial metals commonly employed for external applications. Some of the factors that affect metal behavior in general are discussed at the outset, but since each metal has a characteristic response to the corros...learn more
Table of Contents
First Chapter
AMPT-12 - Corrosion Predictive Modeling for Aging Aircraft - Critical Review & Technology Assessment
Domestic Price: $20.00
Foreign Price: $30.00
Publication Date: 07/01/1999
Budgetary constraints prevent acquiring new aircraft while encouraging life extension of existing aircraft far beyond the design lives. This critical review and technology assessment highlights the significant and innovative aspects of the U.S. Air Force Program to develop a predictive model for ...learn more
Table of Contents
First Chapter
AMP024 - Databook on Mechanical and Thermophysical Properties of Particulate - Reinforced Ceramic Matrix Composites
Domestic Price: $110.00
Foreign Price: $165.00
Publication Date: 01/01/1995
This databook presents much of the available materials characterization data and information on particulate-reinforced ceramic matrix composites. This data was collected from the open literature, vendors, and other sources. It is presented in a well organized, evaluated, and analyzed manner so ...learn more
Table of Contents
First Chapter
AMP025 - Databook on Mechanical and Thermophysical Properties of Whisker-Reinforced Ceramic Matrix Composites
Domestic Price: $110.00
Foreign Price: $165.00
Publication Date: 12/01/1995
This databook is organized into sections which comprehensively cover the mechanical, thermal, and physical properties of whisker reinforced ceramic matrix composites. Data and information on ceramic matrices such as carbides, nitrides, oxides and glass-ceramics reinforced with ceramic whiskers a...learn more
Table of Contents
First Chapter
AMMT-017 - Digital Radiography
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 05/01/2000
This technology assessment report reviews the current state of technology development in digital radiography. Information was collected from various literature searches on digital radiography as applicable to aerospace, commercial, industrial, and medical/dental sectors. The effort focused on t...learn more
AMP229 - Dispersion Strengthening of Metals
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 04/01/1977
This review consists of a brief assessment of developments in dispersion strengthening of 21 metals and their alloys, with a special emphasis on the last 10 years.
Table of Contents
First Chapter
AMP200 - Effects of Surface Condition of the Mechanical Properties of Titanium and Its Alloys
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 08/01/1971
This report reviews the available literature on the effects of commonly encountered surface conditions on the properties of titanium and its alloys. The material properties of major concern include fatigue strength, tensile strength and ductility, and bend ductility.
Table of Contents
First Chapter
AMPT-30 - Elastomeric Materials for Static and Dynamic Seal Applications
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 04/01/2003
Elastomers can be stretched or bent to a remarkable extent without breaking because of their unique properties. The properties of elastomers are well-suited to sealing applications. Most often, the properties that are of interest in sealing applications include hardness, tensile strength, elongat...learn more
Table of Contents
First Chapter
AMP260 - Electron Fractography Handbook
Domestic Price: $150.00
Foreign Price: $225.00
Publication Date: 06/01/1976
The handbook on electron fractography was prepared to assist in the analysis of service failures in the aerospace industry. The program included testing of over 300 specimens of various materials failed under a wide range of known environmental conditions. The alloys selected were of primary inte...learn more
Table of Contents
First Chapter
MT-6M - Electrostatic Discharge Control Manufacturing Guidelines: Mtg ISO 9000 Requirements
Domestic Price: $50.00
Foreign Price: $60.00
Publication Date: 05/19/1998
No description
AMP257 - Engineering Property Data on Selected Ceramics: Volume I, Nitrides
Domestic Price: $60.00
Foreign Price: $80.00
Publication Date: 03/01/1976
This publication is intended to provide a convenient source of reliable, up-to-date property data on nitride ceramics for use in engineering work.
Table of Contents
First Chapter
AMP258 - Engineering Property Data on Selected Ceramics: Volume II, Carbides
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 08/01/1979
This publication is intended to provide a convenient source of reliable, up-to-date property data on carbide ceramics for use in engineering work.
Table of Contents
First Chapter
AMP259 - Engineering Property Data on Selected Ceramics: Volume III, Single Oxides
Domestic Price: $85.00
Foreign Price: $128.00
Publication Date: 07/01/1981
This publication is intended to provide a convenient source of reliable, up-to-date property data on single oxide ceramics for use in engineering work.
Table of Contents
First Chapter
AMP183 - Failure Mechanisms of Composite Structures
Domestic Price: $45.00
Foreign Price: $68.00
Publication Date: 09/01/1989
This report contains detailed results concerning composite structure failure mechanisms of the following mechanisms: (1) Mixed-Mode Fracture of Notched Unidirectional and Off-Axis Laminates Under Tensile Loading; (2) Thermo-Elastic Model for Multidirectional Coated Fiber Composites: Traction Fo...learn more
Table of Contents
First Chapter
AMP274 - First Supplement to the Bibliography on Hot Isostatic Pressing (HIP) Technology
Domestic Price: $20.00
Foreign Price: $30.00
Publication Date: 11/01/1994
This report is the first supplement to MIAC-Report #1 and contains an annotated bibliography of the hot isostatic pressing (HIP) technology dealing with equipment, processing , modeling and applications.
AMP251 - Forging Equipment, Materials, and Practices
Domestic Price: $70.00
Foreign Price: $105.00
Publication Date: 10/01/1973
This handbook covers forging equipment, manufacturing practices, and analysis of forging processes.
Table of Contents
First Chapter
AMP211 - Fracture Analysis by Scanning Electron Microscopy
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 12/01/1972
Scanning electron microscopy (SEM) is used in this study to evaluate fractures in materials. Fractography is defined as the study of the microscopic characteristic features of fracture surfaces. The aim of fractography is to analyze the fracture features and to attempt to relate the topography of...learn more
Table of Contents
First Chapter
AMPT-7 - Group IV Metal Carbides: Processing & Engineering Properties-Critical Review & Technology Assessment.
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 12/01/1998
Group IV carbides have shown promise for use in high speed cutting tools and for high temperature applications such as liners for rocket motor throats and components for equipment used in the nuclear industry. Considerable interest in these materials was evidenced in the 1960s and 1970s and seve...learn more
Table of Contents
First Chapter
AMP261 - Handbook of International Alloy Compositions and Designations Volume 1, Titanium
Domestic Price: $65.00
Foreign Price: $98.00
Publication Date: 11/01/1976
The primary purpose of this handbook is to conveniently interrelate the alloy designation and standards of one country to those of another country for titanium materials.
Table of Contents
First Chapter
AMP262 - Handbook of International Alloy Compositions and Designations Volume 1R, Titanium
Domestic Price: $150.00
Foreign Price: $225.00
Publication Date: 07/01/1990
This handbook is a compilation of data presenting the alloy designations, compositions, standards, and other related information for titanium alloys from the major titanium alloys from the major titanium-producing countries. Included in the handbook are sections on cross-indexed listings of alloy...learn more
Table of Contents
First Chapter
AMP263 - Handbook of International Alloy Compositions and Designations Volume 2, Superalloys
Domestic Price: $70.00
Foreign Price: $105.00
Publication Date: 01/01/1979
The primary purpose of this handbook is to identify and interrelate the compositions, alloy names, designations and standards of one country to those of another country.
Table of Contents
First Chapter
AMP264 - Handbook of International Alloy Compositions and Designations Volume 3, Aluminum
Domestic Price: $130.00
Foreign Price: $195.00
Publication Date: 10/01/1980
This handbook is the third in a series whose objective is to provide reference books to identify the chemical composition, standards and specifications for a wide variety of metals.
Table of Contents
First Chapter
AMP255 - Handbook of Soviet Alloy Compositions (1990 update)
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date: 10/01/1980
The overall objective of the Handbook of Soviet Alloy Compositions is to provide technical research people, i.e., engineers, metallurgists and others, a key to quickly establish the chemical composition of a wide variety of metals and alloys used in the USSR. Recent alloys as well as earlier dev...learn more
Table of Contents
First Chapter
AMP023 - Handbook on Continuous Fiber-Reinforced Ceramic Matrix Composites
Domestic Price: $135.00
Foreign Price: $203.00
Publication Date: 01/01/1995
This handbook comprehensively covers the topic of continuous fiber ceramic matrix composites (CFCCs) from theoretical considerations through raw materials and processing to design, applications, and property topics. Processing science and technology appropriately receive the most emphasis in thi...learn more
Table of Contents
First Chapter
AMP022 - Handbook on Discontinuously Reinforced Ceramic Matrix Composites
Domestic Price: $110.00
Foreign Price: $165.00
Publication Date: 01/01/1995
The key to the development of reliable structural ceramics has been to improve the reliability and toughness while retaining the desirable properties of monolithic ceramics. The development of ceramic matrix composites reinforced with discontinuous second phases has been the response of the cera...learn more
Table of Contents
First Chapter
AMP252 - Handbook on Materials for Superconducting Machinery
Domestic Price: $175.00
Foreign Price: $225.00
Publication Date: 11/01/1975
The purpose of this handbook is to provide a ready reference for designers on the effects of low temperatures on the properties of structural materials that will be considered in developing designs.
Table of Contents
First Chapter
AMMT-007 - Heat Damage in Graphite Epoxy Composites: Degradation, Measurement, and Detection
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 01/01/1998
This state-of-the-art report was motivated by the recognition of need, in particular by the Navy, for information on the measurement and detection of heat damage in graphite epoxy (Gr/Ep) composites. As such, this report reviews current understanding of heat damage in Gr/Ep composites, and metho...learn more
AMP278 - Hot Isostatic Pressing Rejuvenation Technology
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 06/01/1994
Microstructural relationships to mechanical properties in super alloys before and after engine exposure and after HIP rejuvenation is reviewed. Present and future hot isostatic processing is reviewed.
Table of Contents
First Chapter
AMP205 - Impurity Effects in Beryllium
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 03/01/1972
In this report, the research efforts that have brought us to our present level of understanding of these reactions and their effects on mechanical properties of beryllium are traced and our current understanding of this field is summarized and assessed. Lastly, some of the grades of beryllium hav...learn more
Table of Contents
First Chapter
AMPT-18 - Infrared (IR) Windows and Domes: Critical Review and Technology Assessment
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 12/01/1999
This report focuses on the performance of infrared materials, and it is based upon the effort to build a numerical database of these materials. Six initial materials, namely germanium, zinc sulfide, zinc selenide, sapphire, spinel and yttria were chosen after an extensive literature search and th...learn more
Table of Contents
First Chapter
AMP392 - Intermetallic Alloy Material Database
Domestic Price: $300.00
Foreign Price: $450.00
Publication Date:
Purdue proprietary database for Intermetallic Alloy Properties. Product includes a user guide and two setup diskettes. AMPTIAC has created a graphical user interface to the Purdue proprietary Database. This database includes thermophysical and mechanical properties related to Intermetallic All...learn more
AMP312 - Introduction to Metal Matrix Composite Materials
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 06/01/1982
The purpose of this tutorial is to provide a general introduction to metal matrix composite (MMC) materials and technology to individuals with little or no training in this field.
Table of Contents
First Chapter
AMMT-014 - Laser Ultrasonics
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 01/01/1998
This technology assessment report reviews current and past efforts in the field of laser ultrasonics. A brief background on laser ultrasonics is presented, followed by a review of reported applications for use with materials and components. Capabilities, limitations, future trends and opportuni...learn more
AMPT-15 - Life Prediction and Performance Assurance of Structural Materials in Corrosive Environments
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 08/09/1999
Life prediction of structural components is vitally important to safe and cost effective operation of any system in which the materials are susceptible to environmental degradation. Performance assurance which is closely related to life prediction, is equally important to ensure that the system w...learn more
Table of Contents
First Chapter
AMMT-025 - Magnetic Particle Inspection: Capabilities and Problems
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 01/01/1998
This critical review report covers recent developments in the field of magnetic particle inspection (MPI) methods. In spite of its long history, high sensitivity, well established effectiveness, and maturity, MPI is still an evolving technique and quandaries and difficulties in its applications ...learn more
AMPT-28 - Materials for Sensors and Actuators
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 12/01/2002
Sensors and actuators have become an increasingly important technology as more systems become automated and require little human input or operation. The move toward more intelligent automated processes and systems requires a new sophisticated technology, presently being developed in the field of...learn more
Table of Contents
First Chapter
AMPT-MIS - Materials Selection & Mfg. for Spacecraft & Launch Vehicles (Training Slides)
Domestic Price: $400.00
Foreign Price: $600.00
Publication Date:
Training Slides from course on CD Rom.
AMPT-22 - Materials Selection and Fabrication for Spacecraft and Launch Vehicles
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 05/01/2003
The key purpose of this state-of-the-art report is to put into perspective the many types of composites and other advanced materials that are candidates for application in spacecraft and launch vehicles. Monolithic metals are presented primarily to serve as a frame of reference for composites. ...learn more
Table of Contents
First Chapter
AMMT-022 - Mathematical Modeling in Nondestructive Evaluation (NDE)
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 09/01/2002
This technology assessment report presents an overview of mathematical modeling in nondestructive evaluation (NDE). Although many texts and papers have been written that address both select model components and system approaches, only a few works have addressed the subject generally. A discuss...learn more
AMP177 - Mechanical Properties of Graphite/Epoxy Composites at Various Temperatures
Domestic Price: $10.00
Foreign Price: $15.00
Publication Date: 01/01/1988
Off-axis tension tests were performed for coupon specimens of unidirectional graphite/epoxy composites at various temperatures. Elastic moduli and principal strengths of the composite were obtained by a simple procedure. To avoid the complication caused by the extension-shear coupling effect in...learn more
Table of Contents
First Chapter
AMP218 - Metal Implants for Orthopedic and Dental Surgery
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 02/01/1974
This report contains a description of the skeletal anatomy and the structure and properties of bones. Also discussed are the general considerations for the design of new surgical appliances. The alloys used at the time of this report for the construction of metal surgical devices are described an...learn more
Table of Contents
First Chapter
AMMT-005 - Microwave Nondestructive Evaluation
Domestic Price: $50.00
Foreign Price: $60.00
Publication Date: 01/01/2001
This state-of-the-art report contains information on both the fundamental science and general applications of microwave nondestructive evaluation. Chapter contents include: introductory background on microwave and millimeter wave spectra, definition and scope of microwave NDE, dielectric propert...learn more
AMPT-29 - Nanostructured Materials for the Enhancement of Materials Properties
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 11/01/2002
Nanotechnology has become a widely researched field that is advancing at a phenomenal pace. It not only has the potential for providing revolutionary applications in the decades to come, but has already proven capable of providing cost-effective improvements to existing applications. Funding fo...learn more
Table of Contents
First Chapter
AMMT-033 - NDE Applied to Process Control of Composite Fabrication (1994)
Domestic Price: $50.00
Foreign Price: $60.00
Publication Date: 01/01/1994
The Nondestructive Evaluation Applied to Process Control of Composite Fabrication Conference held in St. Louis on 4-5 October 1994 provided a forum for the exchange of information and experience related to nondestructive evaluation methods that are or may be used in process control of the product...learn more
AMMT-029CD - NDE Capabilities Databook, 3rd edition; CD
Domestic Price: $125.00
Foreign Price: $135.00
Publication Date: 01/01/1997
The NDE Capabilities Databook consolidates and organizes available reference data for demonstrated NDE performance capabilities into a single source. In the First Edition, data generated and documented in various forms over the past 25 years through a number of government and private programs wer...learn more
AMMT-029HC - NDE Capabilities Databook, 3rd edition; Hardcopy
Domestic Price: $125.00
Foreign Price: $135.00
Publication Date: 01/01/1997
The NDE Capabilities Databook consolidates and organizes available reference data for demonstrated NDE performance capabilities into a single source. In the First Edition, data generated and documented in various forms over the past 25 years through a number of government and private programs wer...learn more
AMMT-029A - NDE Capabilities Databook, 3rd Edition; Hardcopy & CD
Domestic Price: $175.00
Foreign Price: $185.00
Publication Date: 01/01/1997
The NDE Capabilities Databook consolidates and organizes available reference data for demonstrated NDE performance capabilities into a single source. In the First Edition, data generated and documented in various forms over the past 25 years through a number of government and private programs wer...learn more
AMMT-015 - NDE for Process Control of Polymer Matrix Composite Fabrication
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 10/01/1998
This technology assessment report is based on a review of pertinent open technical literature as well as recent progress in the field of NDE for intelligent processing of polymer matrix composites (PMCs). The scope of the report includes introductory material on: PMCs, design criteria, fabricati...learn more
AMMT-001 - NDE Methods for Characterization of Corrosion
Domestic Price: $30.00
Foreign Price: $40.00
Publication Date: 01/01/1988
This state-of-the-art report provides a survey of the NDE methods presently being used for detection and evaluation of corrosion. These methods include visual, magnetic, thermographic, electrochemical, acoustic emission, eddy current, liquid penetrant, x-ray and neutron radiographic methods. Th...learn more
AMMT-009 - NDE of Cracks in Aircraft
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 01/01/1998
This state-of-the-art-report presents a survey of the status of development of NDE techniques for detecting cracks. The bulk of the information comes from the aircraft sector. Background information is covered on the strategy of aircraft structural integrity concerning cracks. Damage tolerance...learn more
AMMT-008 - NDE of Hidden Corrosion
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 01/01/1998
This state-of-the-art report presents a survey of the status of development of NDE techniques for detecting corrosion, in particular hidden or inaccessible corrosion. A summary is provided on corrosion characteristics, problems in the detection of hidden corrosion, and a recent survey of NDE for...learn more
AMMT-006 - Neutron Radiography
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 10/01/1998
This state-of-the-art report is based on a review of open literature as well as a review of recent progress in the field of neutron radiography. The scope of the report includes introductory material with advantages and limitations of the method presented along with a brief history. The theoret...learn more
AMMT-026 - Nondestructive Evaluation for Condition Based Maintenance (NDE for CBM)
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 10/01/2000
This critical review report presents a summary of methods used or have potential use for condition based maintenance (CBM) programs. A background is provided on various types of condition monitoring to include fluids analysis, performance monitring, vibration analysis, and nondestructive evaluat...learn more
AMMT-002 - Nondestructive Evaluation of Adhesive Bond Quality
Domestic Price: $30.00
Foreign Price: $40.00
Publication Date: 01/01/1989
This state-of-the-art report describes the bonding process, the destructive methods used to measure bond strength, and the various NDE methods that have been evaluated for determining the quality of a bond. These NDE methods include sonics, ultrasonics, acoustic emission, nuclear magnetic resona...learn more
AMMT-011 - Nondestructive Evaluation of Adhesive Bonds
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 12/01/2000
This state-of-the-art report provides a compilation and review of information concerning nondestructive evaluation of adhesive bonds. Although there has been little use of adhesive bonds in primary structures, there are a significant number of secondary stuctures and stuctural repairs that rely ...learn more
AMMT-020 - Nondestructive Evaluation of Advanced Fiber Reinforced Polymer Composites
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 01/01/2001
This technology assessment report provides an overview of current nondestructive evaluation (NDE) methods used with fiber reinforced polymer composites (FRPs) and some newer hybrid composites. These NDE methods are gaining in attention due to the increased usage of composites in the aerospace, a...learn more
AMMT-010 - Nondestructive Evaluation of Residual Stress in Metals
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 06/01/2001
This state-of-the-art report provides a summarization of NDE methods used in the detection of residual stresses in metals. The majority of the report focuses on x-ray and neutron radiography, ultrasonics, and electromagnetic techniques as they encompass the bulk of work in this area. Some newer...learn more
AMP202 - Nontraditional Machining of Beryllium
Domestic Price: $40.00
Foreign Price: $50.00
Publication Date: 01/01/1972
Engineering and metallurgical advances in recent years have placed new and unusual demands on the metalworking industries. New metallic materials with high-strength-to-weight ratios, such as alloys of beryllium, titanium, and other metals, have been developed to serve specific aerospace and indus...learn more
Table of Contents
First Chapter
AMP310 - Numeric Materials Property Database Design and Development: Requirements Analysis, Software Assessment, and Technology Alternatives Assessment (Phase I)
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 03/01/1995
This report presents the results of an analysis of numeric materials property database requirements and an evaluation of database management systems. It presents a list of generic database data.
AMPT-16 - Optical Limiting: An Overview
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 09/30/1999
This report is intended to provide a background adequate for the novice to quickly understand the physical phenomena responsible for optical limiting behavior and the measurements routinely made to characterize the performance of nonlinear materials. In addition, some background is provided on w...learn more
Table of Contents
First Chapter
AMP189 - Optical, Thermoradiative, Thermophysical, and Mechanical Properties of Silicon - Parts 1 & 2
Domestic Price: $95.00
Foreign Price: $143.00
Publication Date: 08/01/1994
This report presents numerical data and technical information on the properties of pure silicon and doped silicon materials. Materials comprise a variety of doped silicon materials, having both n-type and p-type conduction. Property coverage includes optical (absorption coefficient and refracti...learn more
Table of Contents
First Chapter
AMPT-1 - Oxidation and Corrosion of Intermetallic Alloys
Domestic Price: $136.00
Foreign Price: $204.00
Publication Date: 11/01/1996
This report provides researchers and development engineers with essential information on intermetallic alloys for high temperature. The information will enable users to make judicious choices for their needs including initial properties but, more importantly, by enabling them to estimate the per...learn more
Table of Contents
First Chapter
AMP019 - Physical Metallurgy of Uranium Alloys (AMTC-3)
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 09/01/1974
This volume, the Proceedings of the Third Materials Technology Conference, will be invaluable to scientists and engineers concerned with the use of depleted uranium for a broad spectrum of applications. Uranium in its depleted form is useful for nonuclear applications by virtue of its high densit...learn more
AMPT-31 - Polyaniline Coatings for Corrosion Prevention
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 04/01/2003
The use of the conductive polymer polyaniline as a corrosion preventative coating for metals is a new and emerging technology. Coating metals with dispersed polyaniline works to shift the corrosion potential of the metal towards that of the noble region and to form thin metallic oxide layers on t...learn more
Table of Contents
First Chapter
AMMT-019 - Probability of Detection (POD) for Nondestructive Evaluation (NDE)
Domestic Price: $55.00
Foreign Price: $65.00
Publication Date: 08/01/2001
This technology assessment report provides an evaluation of the probability of detection (POD) quantitative measure used to determine the capability of various NDE methods. The development of evolution of the POD metric has resulted in a much better understanding of NDE procedures and the sensit...learn more
AMP227 - Processing and Applications of Depleted Uranium Alloy Products
Domestic Price: $45.00
Foreign Price: $68.00
Publication Date: 09/01/1976
The purpose of this report is to present property, processing and fabricating information for depleted uranium alloys which could lead toward a more extensive use of this material.
Table of Contents
First Chapter
AMP267 - Properties of Intermetallic Alloys Volume I, Aluminides
Domestic Price: $400.00
Foreign Price: $600.00
Publication Date: 10/01/1994
This volume contains evaluated and analyzed data on the thermophysical and mechanical properties of cobalt, iron, nickel, ruthenium, scandium, titanium, and zirconium aluminides.
AMP268 - Properties of Intermetallic Alloys Volume II, Silicides
Domestic Price: $150.00
Foreign Price: $225.00
Publication Date: 10/01/1994
This volume contains evaluated and analyzed data on the thermophysical and mechanical properties of silicides of cobalt, iron, molybdenum, niobium, nickel, rhenium, tantalum, titanium and zirconium.
AMP269 - Properties of Intermetallic Alloys Volume III, Beryllides and Miscellaneous Intermetallic Alloys
Domestic Price: $150.00
Foreign Price: $225.00
Publication Date: 05/01/1995
This volume contains evaluated and analyzed data on the thermophysical and mechanical properties of thirty-five beryllides and thirty-three miscellaneous intermetallic alloys.
AMP270E - Properties of Intermetallic Alloys, Three Volume Set Electronic Version
Domestic Price: $300.00
Foreign Price: $450.00
Publication Date:
This three-volume databook on mechanical and physical properties of 152 intermetallic alloy systems contains over 1700 sets of analyzed data from over 200 sources. Each dataset contains numerical and graphical data and as much information as possible about the chemical composition, processing hi...learn more
AMP270 - Properties of Intermetallic Alloys, Volume I, II, III
Domestic Price: $600.00
Foreign Price: $900.00
Publication Date: 06/01/1990
This three-volume databook on mechanical and physical properties of 152 intermetallic alloy systems contains over 1700 sets of analyzed data from over 200 sources. Each dataset contains numerical and graphical data and as much information as possible about the chemical composition, processing hi...learn more
AMP219 - Properties of Textured Titanium Alloys
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 06/01/1974
This report reveals that many important engineering properties of titanium and its alloys are anisotropic and that this anisotropy can be used to achieve improvements in structures for other applications.
Table of Contents
First Chapter
MT-93-01 - Rapid Prototyping
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 10/23/2003
This report provides an overview of the current applications and technologies associated with rapid prototyping. It expands upon previous MTIAC reports on this topic and describes the status of equipment suppliers in terms of technical advancements, market size and share, existing and potential a...learn more
AMP031 - Recent Developments in Piezoelectric Ceramic Composites
Domestic Price: $35.00
Foreign Price: $53.00
Publication Date: 11/01/1995
This Critical Review and Technology Assessment Report presents the results of an assessment of the status of piezoelectric ceramic composites. Research on advanced piezoelectric materials has been driven by needs for various devices. The three primary application areas are: hydrophones for und...learn more
AMP279 - Recent Developments in Powder Metallurgy Processing Techniques
Domestic Price: $60.00
Foreign Price: $90.00
Publication Date: 11/01/1994
Recent developments in powder metallurgy (P/M) processing techniques with emphasis on those "far from equilibrium" processes which lead to enhanced mechanical and physical properties compared to conventional ingot metallurgy (I/M) approaches are reviewed. Amongst the facets of P/M synthesis/proc...learn more
AMP276 - Refractory Metal Disilicides Research
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 12/01/1992
This report is intended to serve as a status report on fundamental properties and a review of recent research. A major goal has been to incorporate aspects for electronic and structural applications.
AMP234 - RHEOCASTING Proceedings of a Workshop Held at the Army Materials & Mechanics Res. Ctr.
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 01/01/1978
This booklet contains a program and extended abstracts of presentations given at a workshop on rheocasting. The results are included with these abstracts.
Table of Contents
First Chapter
AMMT-034 - Second Conference on NDE Applied to Process Control of Composite Fabrication (1996)
Domestic Price: $50.00
Foreign Price: $60.00
Publication Date: 01/01/1996
The Nondestructive Evaluation Applied to Process Control of Composite Fabrication Conference held in St. Louis on 1-2 October 1996 provided a forum for technical presentations and exchange of ideas on technology developments that may lead to potential and/or significant advances in process contro...learn more
AMP275 - Second Supplement to the Bibliography on Hot Isostatic Pressing (HIP) Technology
Domestic Price: $20.00
Foreign Price: $30.00
Publication Date: 08/01/1995
This report contains an annotated bibliography of the hot isostatic pressing (HIP) technology dealing with equipment, processing, modeling and applications.
AMP254 - Second Supplement to the Handbook on Materials for Superconducting Machinery
Domestic Price: $75.00
Foreign Price: $100.00
Publication Date: 01/01/1977
This supplement, as does the original handbook, contains information on the mechanical, thermal, electrical, and magnetic properties of selected structural materials that might be considered for components of superconducting machinery. Since this information is primarily intended for designers of...learn more
Table of Contents
First Chapter
AMP256 - SEM/TEM Fractography Handbook
Domestic Price: $110.00
Foreign Price: $165.00
Publication Date: 12/01/1975
This handbook contains both SEM and TEM fractographs and can be used as an effective reference handbook to aid investigators in fracture surface analysis.
Table of Contents
First Chapter
AMPT-23 - Sensor Technologies to Monitor Resin Transfer Molding (RTM) Processes
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 05/30/2000
On-line process control requires sensors that can provide output information such as viscosity and degree of cure. Spectroscopy measures directly the concentration of the reacting chemicals during cure, thus enabling the monitoring of viscosity. Sensors that collect data on viscosity facilitate...learn more
Table of Contents
First Chapter
AMP390 - Silicon Properties PC-Based Database
Domestic Price: $75.00
Foreign Price: $113.00
Publication Date:
This database includes the following properties related to pure and doped silicon, having both n-type and p-type conduction as well as intrinsic silicon: optical (absorption coefficient, refractive index, and band gap), thermoradiative (normal and angular spectral reflectance, normal spectral em...learn more
AMP017 - Solidification Technology (AMTC-1)
Domestic Price: $55.00
Foreign Price: $83.00
Publication Date: 07/01/1974
This volume, the proceedings of the First Materials Technology Conference, will be invaluable to both academic and industrial researchers and to those engaged in solidification techniques and practices. The nineteen chapters were prepared by recognized experts in the areas of control of structur...learn more
AMPT-34 - Structural Health Monitoring (SHM): A State of the Art Report
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date: 04/01/2008
The subject of Structural Health Monitoring (SHM) has become increasingly important as an additional component of overall Nondestructive Evaluation (NDE) programs and is now being used in a variety of applications including spacecraft components, bridges, and aircraft. In addition to the Army, N...learn more
AMP242 - Technological Advances in Joining
Domestic Price: $55.00
Foreign Price: $83.00
Publication Date: 10/01/1981
Many of the significant advances that have contributed to the growth in materials joining during the middle and late 1970's are described in this report. The subject matter is organized into two groups.
Developments are discussed with respect to specific joining processes, the characteristics of...learn more
Table of Contents
First Chapter
AMPT-19 - Technology Survey on Textile Preforms for Composite Processing: A State of the Art Review
Domestic Price: $100.00
Foreign Price: $150.00
Publication Date:
Textile preforming is a fiber placement method utilizing textile processes prior to the formation of composite structures. Textile preforms are the structural backbone of a composite analogous to the structural steel framework in a building. Starting with linear assemblies of fibers in continuou...learn more
Table of Contents
First Chapter
AMPT-2 - Texture Development and Anisotropic Properties from High Temperature Forming Operations in Metals and Intermetallics
Domestic Price: $40.00
Foreign Price: $60.00
Publication Date: 02/01/1997
The essential and particular features of deformation and recrystallization textures in FCC, BCC, and HCP metals, and ordered intermetallics based on such lattices, have been reviewed. It is revealed that texture, despite being perceived as a macroscopic, scale independent property, is quite sens...learn more
Table of Contents
First Chapter
AMMT-012 - Thermography for Nondestructive Evaluation (NDE)
Domestic Price: $75.00
Foreign Price: $85.00
Publication Date: 11/01/2001
This state-of-the-art report reviews current infrared thermography for nondestructive evaluation (NDE). Although thermography is a mature field, considerable work has been performed over the later 1990s. As such, this report concentrates on work published in from 1998 through midyear 2001. Inf...learn more
AMPT-6 - Third Order Non-Linear Organic Thin Films for Eye & Sensor Protection-Phthalocyanines and Porphyrins SOAR
Domestic Price: $50.00
Foreign Price: $65.00
Publication Date: 12/01/1999
Optical limiters are devices that strongly limit intense optical beams while exhibiting high transmittance for low intensity ambient light levels. These nonlinear optical devices are currently of significant interest for the protection of human eyes and optical sensors from intense laser pulses,...learn more
Table of Contents
First Chapter
AMP250 - Titanium Alloys Handbook
Domestic Price: $200.00
Foreign Price: $300.00
Publication Date: 12/01/1972
Interest in titanium was stimulated in the early 1950's, when it became evident that the temperature requirements in airframe and jet-engine components were exceeding the capabilities of existing lightweight alloys. Titanium, with its low density and high melting temperature seemed to be a promis...learn more
Table of Contents
First Chapter
AMPT-32 - Titanium Aluminides
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 04/01/2003
This report provides an examination of existing titanium aluminide technologies. It presents a brief history of titanium alloys, but its focus is on properties and processing of these intermetallics. Twenty-first century aerospace systems will have mission requirements that demand advanced mate...learn more
Table of Contents
First Chapter
AMMT-031 - Transcripts from Workshop on NDE of Adhesive Bond Strength (1988)
Domestic Price: $25.00
Foreign Price: $35.00
Publication Date: 01/01/1988
The transcripts included here are taken from the presentations at the Workshop on NDE of Adhesive Bond Strength held on April 13-14, 1988 in Orlando Florida, in conjunction with the Spring Conference of the American Society for Nondestructive Testing. The transcripte were taken from tape recordi...learn more
AMPT-27 - YBCO Superconductors-CRTA
Domestic Price: $50.00
Foreign Price: $75.00
Publication Date: 04/01/2002
This report emphasizes the research conducted on the processing of YBCO superconducting materials to produce high critical current densities. The processing of powders through the fabrication of bulk materials and the deposition of films is covered, along with advantages and disadvantages of the ...learn more
Table of Contents
First Chapter
|
